fiberglass

Okay so my brother works around fiberglass and the family cat laid on his clothing, and now she is losing her fur in patches. Is it okay to bathe her? will it help? Please get back asap!

I'm working on a small model yacht (~40cm) and I was curious as to why none of the designs I found incorporate ballast inside the vessel and instead use a drop keel. Why can't a model have the ballast inside like tall ships use to, and if so, how would I calculate that? Also, I am in an area...

I wrote on my boat with dry erase now it won't freakin come off...

I have a fiberglass enclosure that I built It has a place for 2 ports, and it handles 2 12s. The box is 5.03 FT3, The subs I plan on using are Boss P12DVC. They need 1.95 FT3 for a ported box. My fiberglass box does not have a divider. I am going to use a Boss Mono PH4000D amp. I plan on using...

Is there anything I can do for some surface "cracking"/"spiderwebbing" on my 21' SeaRay fiberglass boat? It doesn't appear to be new or spreading quickly. Perhaps there is a seal commonly used. Or perhaps I shouldn't worry about it. The boat was manufactured in 1987 and has been well taken...

on my 1963 VW pan. Any web sites? My body looks like a Meyers Manx, but it is not. It looks to me like someone made a mold from a late 60's short body Meyers Manx and cloned it. It is hand laid fiberglass rather than a chopper gun glass job. Also, the dash is fiberglass and molded in too. Any...

glue. I NEED HELP BAD!!!! Thanks? On both sides of my bumper the screws came out, and it's really loose, and I'm afraid it's going to come off while I'm driving.

i was told chewing tabacco/ snuff like red seal, skoal, cope,etc. has fiberglass in it is this true or just a myth? please if you are just going to tell that chew/dip is bad and not to do it then i have heard it before. I am doing research and need accurate info.

...wells out the holes are still there? I have no idea how to plug these live well holes and make them water ready help

where u hook the boat to the trailer, there is that eye. well i want to take that one off and fill in the hole so i could drill new holes for different one. what would i need to fill in hole, and how would i do it? the hole is about a little bigger than a half-dollar.

which is the best bottom paints for fiberglass boat hull?

...5500rpm. What prop would be best? I am looking to replace my aluminum propeller with stainless steel. Trying to figure out the best propeller for this application. The propeller that I'm looking at comes in 4 sizes for this motor: 10-3/4 x 12, 10-1/2 x 13, 10-3/8 x 14, 10-1/8 x 15...

I have a 15ft Oauchita fiberglass boat that has been sitting in the woods for atleast 3 years. The boat is pretty heavy. I was thinking of pulling the boat with my truck to level ground. Dont know where to start from there. Any help would be great, Thanks

i used to have 2 subwoofers in a custom pored box and they sounded amazing, a mtx 8000 and an alpine type r. the mtx 8000 stopped working so i had to get a new box because the alpine couldnt push all the air right since now it had to push twice as much. my friend built me a wooden box and then...

I have a sunfish sailboat. While trailering, I went over a bump, the roller on the front of the trailer disintegrated (dry rot) and the support mounting punched through the bottom of the boat. I have bought Marine Tex White to repair but am not sure whether this should be a one pass process or...

Looks sort of like a big fiberglass bathtub. Old style like '60s or something

I tried it earlier tonight and my lip does feel weird. it doesnt hurt but it feels kind of sore. don't give me any bs about cancer cause im not addicted and i never will be.

Car is holden commodore v6 00 rear wheel drive. boat is 4.3m with 50hp merc.

[No message]

I wanted to know what year kenworth put fiberglass tops on their cabs