rotors

i am replacing the rear rotors on my cousins 1995 jeep grand cherokee. i have beat the holy s*** out of them, drenched them with PB Blaster, pried on them and every combination. i know that the e-brake may be hanging up on the inside but the adjuster star nut is locked up as well as the...

i am replacing the rear rotors on my cousins 1995 jeep grand cherokee. i have beat the holy s*** out of them, drenched them with PB Blaster, pried on them and every combination. i know that the e-brake may be hanging up on the inside but the adjuster star nut is locked up as well as the...

I was given some rotors by a co-worker who owns a 2011 Ford Mustang GT and need to replace the brakes soon on my 300, and would like to replace the rotors at the same time if these work. Can I use them on my car?

I just replaced the pads and rotors on both sides on the front of my 1989 xj jeep cherokee. Did not replace calipers or bleed them at all. When I went to test it i got no brake pressure when the car is on, but it will pump up hard when its off. Any ideas? I used a clamp to get the pistons back...

I'm trying to take off my old rotors with to no avail. I've been banging away at the rotors for a long while now with no luck. Is there any special thing I have to do to loosen them up?

Hi i need to find out how much it would cost me to replace brakes and rotors on a 2002 Nissan pathfinder. I would like to not be ripped off thanks yahoo :)

I have a Honda Pilot SUV. Earlier in the year, I went to Honda service center for 60k maintennce and they told me I need to replace my rear brakes and I went ahead with their suggestion. In the bill, it was listed as "Replaced rear Brake Pads and Surface Rotors" and the parts were listed as $58...

I have tried OEM and some after market, I even did the last brake job myself. Everything seams to warp after a few thousand miles. I don't drive like a race car driver but I do commute 50 miles a day.I heard there were some new drilled or cross cut rotors on the market that disapate heat better...

...replaced on a 1996 mazda millenia? I'm from a small town in MI and would be going to either a muffler man or a napa auto care center. The problem- front end squeaking seemingly coming from both tires when going slow speed or slowing down/stopping and also when turning. I called both shops...

About %50 of the rotors on my two front wheels are being used. The brake pads on both wheels is hitting the outer edges only. The middles are full of rust. This started after i painted the original calipers and put new pads on. I used a wire wheel to remove the rust, then prepped with brake...

07 pontiac g6 2.4L

In a car I have it was said I needed new bushings, which has to be placed in the engine. To my understanding the bushing itself is cheap but the work and labor to take out and put back the engine is costly, around $600. Now I should have been replaced my brakes, which I believe is the cost of my...

what other parts from other cars could i replace with the tc? any suggestions for a front bumper for a scion tc

now they are smoking a lot when i stop and it smells awful (kinda like burning rubber). I just had them replaced last night and I havent drove it much (maybe 20 miles) and now is the first time i noticed it. What could it be? Is something wrong or is this normal? Thanks for all the help

I know the front wheels do more braking, but why?

It's a 2002 Chrysler Sebring. I had a guy come out and replace all the rotors and brakes. He did the front ones first. He put the emergency brake on, finished them, left the emergency brake on, and then replaced the rear ones. Everything looked good. He got in the car to tsst them and make sure...

Which are better?

do i need to remove the axle nut to remove the rotor?

I have a 2006 Hyundai Tucson. My rear passenger side brake is making some interesting "scraping" sounds. Today it progressed to a grind when I braked. None of the other brakes appear to making any noises. I have 80,000 km on my car now, so I am sure that all the pads need to be replaced, and...

bolts that hold on the caliper.? There's 2 bolts (guide pins) that hold the brake caliper on. These 2 bolts are different from each other, one goes in the top and one in the bottom. The difference between the 2 is that one has some square parts to it and the other one has black teflon looking...