Consider a DC motor driven by a DC supply. When supply voltage is suddenly reduced back emf becomes momentarily more than the supply voltage, which should drive a current in the circuit opposing the polarity of the supply. Will this damage the DC supply due to wrong polarity?
i have a circuit with 2 resistors in series (15kohms and the other is only 40ohms) then 3 resistors in parralell and they are (25kohms, 50kohms and 150kohms) the voltage is 24v and thats all the information that is given.
i have to work out the: total resistance of the circuit, the total current...
i have a circuit with 2 resistors in series (15kohms and the other is only 40ohms) then 3 resistors in parralell and they are (25kohms, 50kohms and 150kohms) the voltage is 24v and thats all the information that is given.
i have to work out the: total resistance of the circuit, the total current...
What happens to current through a DC motor as it is slowed, explain using Kirchoff's Voltage Law and Faraday's Law.
Thanks!
Oh and by slowing down the DC motor, I mean as in physically touching the DC motor to slow it down (basically increasing the resistance I believe)
Hi there, I have a 30 V dc power supply. I want to have a 12 V output from this. Can someone suggest a proper way to do this? I couldn't find a suitable voltage regulator.
My phone is a Sony Xperia.
For example, at any given time, the battery voltage is reported as 3.915V. Now, when I plug in the charger, the voltage is reported to be 3.810V. When I plug out, the voltage increases again to 3.915V.
Why does the reported voltage decrease when I plug in the...
I installed a 12v after market Voltage regulator in my Vw beetle yesterday I think i got all the wiring right but.... when i start the car my generator light is on and my battery light is on they dont turn off when i start the car, they never used to do that before i just had to change out the...
Last night I broke the charger for my phone, so I've been using my car charger in the mean time until I get a new one. It's not too big of a deal or anything, but it's really inconvenient so I started looking for a spare charger with the same connector tip.
To my luck (or not) I found one with...
Guys, I just learnt about current and terminal pd, and emf and all the rest of it. We learnt that a current against terminal pd graph has a negative slope, with the y-intercept being the emf of the battery.
The only thing I don't understand is why is the slope negative? I know V = E - Ir, and...
I need to convert a pulse width signal to a steady DC voltage. The catch is, this voltage will be fed into a voltage-controlled oscillator, so a simple RC filter isn't good enough. I need as little ripple and as fast a transient time as possible. Also, I need it to perform really consistently...
Hi, my rear bulb on my car has gone so i took the bulb to the shop and it's a P21/5W 12V however they have given me a P21/12W 24V and said that it will be fine, will it? Just thought it must be 5w and 12v for a reason? Not being an expert on electrics just thought i'd check. Thanks
...anyone help out with this? a 5 V mobile phone charger from a 9V battery using a voltage divider circuit. The
mobile phone rechargeable batteries are NiCd type, thus a 50mA charging current must be
supplied for charging the batteries.
...Infiniti Nano Silver Hair Straightener? http://ecx.images-amazon.com/images/I/31lnhmLSd2L._SL500_AA280_.jpg
http://essentialgearguide.com/1/wp-content/uploads/2008/12/conair-infiniti-nano-silver.jpg
and if yes then please share the link where u saw it
can you please also share models of...