I just finished doing a clutch job on my rsx, and now I ran into some problems. To begin I bought a new clutch kit and I tore down the transmission and saw that previous owner had a aftermarket act clutch. So I ripped it out and attempted to put on OEM pressure plate but it would'nt bolt down to flywheel so I had to reuse old pressure plate and use new throwout bearing and new disc. So long story short I can move through all the gears smoothly when engine is off but I can't shift into first or any gear when its on. And also When I put it in first and start up the car it just lurches forward with my foot all the way to pedal. I don't know what to do