Ok, so I just rebuilt and reinstalled the carb, air box, and gas tank onto my bike. It starts up and runs fine, idles fine, rev's fine, but here is the dilemma. The idle is tuned to 1500 rpms, and when you pull on the throttle, it will rev fine, to 5, 6, or whatever rpm you pull to, but when the rpms go down again, it won't descend lower than 3000 or so. So, with the tank raised and slightly to the side, I pushed on the flange to close the venturis. They will close manually and stay at the desired idle setting, but it won't return to idle on it's own. The choke is closed. The throttle cable is not sticking. It just won't descend below 3000 rpms on its own. Any advice on why it is sticking?
Cheers~
PS: Also, I tried with the air filter on and with it off to make sure that air flow was not an issue. All adjustments have been attempted for the idle, and the throttle (both at the carb and at the handle).
Cheers~
PS: Also, I tried with the air filter on and with it off to make sure that air flow was not an issue. All adjustments have been attempted for the idle, and the throttle (both at the carb and at the handle).