yesterday i was asking about hooking up two 12" subs to a 4 channel amp and how is the best way to do it to get the most out of my amp at hand and this is one answer that i got that i can NOT understand, can somebody maybe break it down in more simple english or maybe provide a diagram?
"what you need to do is wire yours subs in parallel, asuming they are 4 ohms, this will give u a 2 ohm resistance, powered buy the 600 watt, which you need to wire mono. so connect pos to pos on the speakers, neg to neg, then you will have those 2 connections to wire the amp bridges"
I have googled how to bride an amp but it's been no help, can somebody please help me? I'm stumped.
"what you need to do is wire yours subs in parallel, asuming they are 4 ohms, this will give u a 2 ohm resistance, powered buy the 600 watt, which you need to wire mono. so connect pos to pos on the speakers, neg to neg, then you will have those 2 connections to wire the amp bridges"
I have googled how to bride an amp but it's been no help, can somebody please help me? I'm stumped.