FIX MY RAZR! pleaseeeeeeeeee?

fob98

New member
Feb 11, 2009
1
0
1
ok so everytime i open my RAZR it turns white, but it still can call people if i use the voice command. how can i fix this?
 
you cant really.
The Razr is the reason I will never get a motorola phone. This happens a lot.
If its still under warranty you can exchange it, but its ultimately pooched.
 
you cant really.
The Razr is the reason I will never get a motorola phone. This happens a lot.
If its still under warranty you can exchange it, but its ultimately pooched.

Are you saying this because you actually know? Doubt it, cuz you're wrong. I can think of different reasons why the lcd is all white. The flex cable. It either has a loose connection with the motherboard or lcd (there's two ends to the flex cable) from the phone being dropped pretty good. All you would have to do is, well, the obvious, make sure the connection is good. Now the flex cable can also be sliced into. I'm gonna try and explain this as best I could. If you open the flip and try to wiggle the top half and bottom half, (not rough!) while looking at the left side hinge, is it lose on that side? If it is, it's because of poor design. There on the side of the hinge, you will notice a chrome plated "knuckle" which is made of plastic, which breaks easily, which, if broken cuts into the flex cable, thus getting a white screen and also blank and the whole top portion not working anymore because the flex cable was really cut good. Another reson for white screen could again be from dropping the phone and internally ruining the lcd. Fixing this depends on how much you like your phone and how cheap you can get parts. Maybe you got a friend with an old one? Just in case, here is a site you can find instructions to take your phone apart: Ajay16 Disassembly Guides
 


Write your reply...
Back
Top