Reply to thread

Message: <blockquote data-quote="JMan1" data-source="post: 2672612" data-attributes="member: 290339">ummmmmm you dont have to take the axle out the axle has nothing to do with the upper ball joints you just need a ball joint seperating fork to pop the upper control arm off of the spindle and unbolt the upper control arm and the strut have some one use their foot to press down on the edge of the brake rotor to lower the strut and spring down and pull the upper control arm out over the strut and do the revers to put it back in. as for the lower that would take a little longer to explain so just look it up on youtube.(edited) i left out the word upper in the first part of what i said *the axle has nothing to do with the upper ball joints. you will have to take the axle out of the spindle for the lowers.</blockquote>