Reply to thread

Message: <blockquote data-quote="Josh" data-source="post: 2655906" data-attributes="member: 207441">each sub has a 150 watt rms rating and two 4ohm voice coils, you wanna wire both subs in series separately this will give each sub an 8ohm load, then wire both parallel to get a 4ohm load. your amp put out 200 watt at 4ohm so there is no risk to blow your subs in this case.when wiring the subs to a load of 2ohm, don't turn the gains all the way up. i don't recommend wiring down to 1ohm.here some wiring diagrams http://www.crutchfield.com/S-KycsK6nSEum/learn/learningcenter/car/subwoofers_wiring.html</blockquote>