I Have a Motorola "ROKR" phone with a 2GB micro SD and it won't read my memory card! Help me out!

  • Thread starter Thread starter Mel Bel
  • Start date Start date
M

Mel Bel

Guest
I Have a Motorola "ROKR" phone with a 2GB micro SD and it won't read my memory card! Help me out!

YES I HAVE FORMATTED IT BEFORE, I DON'T HAVE THE OPTION TO FORMAT IT AGAIN BECAUSE IT WON'T READ THE CARD WHEN I INSERT IT TO THE PHONE.
 
I Have a Motorola "ROKR" phone with a 2GB micro SD and it won't read my memory card! Help me out!

I had a similar problem ... it seems that I didn't push the card hard enough into the memory slot ... resulting in an incomplete insertionif it's a new phone, maybe the spring-contacts are still a bit stiff
 
I Have a Motorola "ROKR" phone with a 2GB micro SD and it won't read my memory card! Help me out!

Might Sound a bit Useless, but works!First Remove the Card. Restart the Phone. Now Use Your phone memory once. Eg: Messaging.now Switch Off, Put the card inside, Push it deep but not so far that the instrument is damaged. There is a satisfactory sound when you push it. Now Switch On.If Still doesnt work, there are two options:1.The phone Gets hanged or only some parts are being read or you are ABLE to save pictures in Mem Card, the the solution is: Use a Card Reader to Format your Card. Now when you insert it asks for a format, do that again in the card, it is bound to work.2.There is absolutely no signs of life of the card, Go to the dealer and show him. There are other complex ways of resetting a card using exact amount of voltage in Pin Numbers 5 and 0. But it is not really recommended as it might result in damage of card for in correct voltages.
 
Back
Top