Jan 29, 2009 #1 C CurtisT New member Joined Nov 19, 2008 Messages 8 Reaction score 0 Points 1 The computer just says drive missing ! Even though the DVD RW is there along with the old CD rom drive - any ideas ?
The computer just says drive missing ! Even though the DVD RW is there along with the old CD rom drive - any ideas ?
Jan 29, 2009 #2 Y yeahwell New member Joined Jun 16, 2008 Messages 4 Reaction score 0 Points 1 remeove the old one plug new one in where it was jump into the bios, make sure all channels are on and set to auto... and do the jumper thing...
remeove the old one plug new one in where it was jump into the bios, make sure all channels are on and set to auto... and do the jumper thing...
Jan 29, 2009 #3 G Glentoran_FC New member Joined Nov 20, 2008 Messages 15 Reaction score 0 Points 1 you may need to adjust the jumper settings, make sure one is set as master and one as slave and they are at the correct points on the ide cable, both set at cable select should work but in my experience it doesnt always
you may need to adjust the jumper settings, make sure one is set as master and one as slave and they are at the correct points on the ide cable, both set at cable select should work but in my experience it doesnt always
Jan 29, 2009 #4 J JA12 New member Joined Jan 29, 2009 Messages 3 Reaction score 0 Points 1 Have you configured your BIOS so that your PC knows about the new drive? Have you installed the driver software for the new drive?
Have you configured your BIOS so that your PC knows about the new drive? Have you installed the driver software for the new drive?