This car has a loud ticking in the top end, can I fix it ? Car has over 200.000 miles and ben told it's a common problem. What would be the vale setting?
This rare Honda head is hard to find on an even harder to find H23A VTEC blue top engine that came from the; '98-02 japanese Accord SIR Wagon (chassis CH9), '98-02 european Accord Type R (chassis CH1, not the standard red top H22), and possibly a Honda Prelude either produced for: Japan, Europe...
ok what does it mean by warped?
I have a straight edge but thats as far as i go. I'm not sure what to do after that. Do i have to check if the surface is flat or something ? and i remember something about gaps.
I'm 6'5" and I've test driven some of the bigger 4 cyl cars like the Accord and Camry, but they're so low to the ground and extremely uncomfortable for my height. Crawling down into them and having to sit at an angle and not perfectly straight is a hernia just waiting to happen. I'm looking for...
...4.3L (262 cid) V6 Block ? Have a 1987 El Camino with a V6 4.3 .... Looking for better cylinder heads. And I heard that you can use 1992-1995 Vortec cylinder heads from the GMC Syclone .... Are if I can, what would it change, like compression and ect. ?
Drove truck out of town, once on highway for about 20 min, clutch had no pressure, would go all the way to firewall with no resistance. Then once i slowed down or pumped the clutch it would come back and act completely fine when driving around town. Checked clutch fluid and no drop or signs of a...
Drove truck out of town, once on highway for about 20 min, clutch had no pressure, would go all the way to firewall with no resistance. Then once i slowed down or pumped the clutch it would come back and act completely fine when driving around town. Checked clutch fluid and no drop or signs of a...
Working on a car.... need to find out if the #1 exhaust valve, and the #1 intake valve are both on #1 cylinder.... or if they are in different positions.
it might, measure both of them see how close they are. as long as it fits in the hole and has the same gear teeth on it. make sure it has the right gear other whys your truck is fucked
i couldn't give the car up, first day off the lot after i parked after some hard driving, the clutch pedal loses all backpressure and feels like a sponge, then i can't engage any gears, even reverse made the car jump forward, now the dealership took the car back, replaced the part (supposedly)...
I want to buy an Accord But I am afraid of Transmission problems. I heard that 6 Cylinder transmisssions had a whole bunch problems.
However, I am looking for a 4 cylinder model, do these have problems too? 1994-2002?
It is just a steel stud screwed into an aluminum head?
Go to a hardware store that sells heli-coil or other similar repairs, get a drill and a tap the next size larger than the stud, drill it and tap for a or 2 mm larger stud.
You might have to make the hole in your exhaust manifold bracket a...
my truck started with the check engine light on and a noice inside the engine so i took the truck to auto zone they told me it had a missed fire cylinder #5 so we called a mechanic he changed the spark plugs and changed the oil i had never change the spark plugs before and almost never changed...
...Chevy Cavalier? I dont have a lot of knowledge doing this but the acceleration I get out of my car freaking drives me nuts, and I really whant to do something about it.
I can get a 1996 Jeep Cherokee 8 cylinder for free but i can not afford the gas. Most of the 1996 models were made with a 6 cylinder. Is there any cheap modifications that I can do to make it more fuel efficient and how much would it cost? Is it possible to get 2 cylinders disconnected so that...