I just bought a 90' 4x4 ex cab auto with the v6 3.0. The coolant level was very low on the truck. The oil was over filled by two quarts (but there was hardly a discoloration due to coolant contamination) I started the truck and it fired right up with a little press on the pedal.After it fired up...
I just bought a 90' 4x4 ex cab auto with the v6 3.0. The coolant level was very low on the truck. The oil was over filled by two quarts (but there was hardly a discoloration due to coolant contamination) I started the truck and it fired right up with a little press on the pedal.After it fired up...
I just bought a 90' 4x4 ex cab auto with the v6 3.0. The coolant level was very low on the truck. The oil was over filled by two quarts (but there was hardly a discoloration due to coolant contamination) I started the truck and it fired right up with a little press on the pedal.After it fired up...
I just bought a 90' 4x4 ex cab auto with the v6 3.0. The coolant level was very low on the truck. The oil was over filled by two quarts (but there was hardly a discoloration due to coolant contamination) I started the truck and it fired right up with a little press on the pedal.After it fired up...
had backfiring out of exhaust, took to service garage they told me exhuust manifold gaskets were leaking. to replace them would be very costly because ford used exhaust manifold bolts that were designd to not back out after they were tightend. the chance of them breaking very good if can'nt get...
had backfiring out of exhaust, took to service garage they told me exhuust manifold gaskets were leaking. to replace them would be very costly because ford used exhaust manifold bolts that were designd to not back out after they were tightend. the chance of them breaking very good if can'nt get...
i have a stock 305 from an 87 camaro and im gettin a 350 crate engine from summit and was wonderin if the intake manifold from the 305 would fit the 350 along with the carb
Manifold Swap Project E36 M3
I m pretty much going to start work on a new project car 1999 m3, and I was going to swap my 1999 (m52) stock manifold with 1995 352i (s50) manifold because I have done some researches and I find out that M50 manifold has a larger hole which that gives me...
Manifold Swap Project E36 M3
I m pretty much going to start work on a new project car 1999 m3, and I was going to swap my 1999 (m52) stock manifold with 1995 352i (s50) manifold because I have done some researches and I find out that M50 manifold has a larger hole which that gives me...
...this header will it pass? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220508831600&ssPageName=STRK:MEWNX:IT
please tell me this will pass expection the link is above
and if so tell me why
Will this likely cost a ton of money to repair, I will only be using the truck on rare occasion, maybe 50 miles a month.
Also, what are the chances that a vehicle with an exhaust manifold leak will pass inspection?
Any quick, cheap temporary fixes?
I broke one of the bolts off of the exhaust manifold on my chevy 2500 and I do not have the money to buy another exhaust manifold. How do you drill out and re tap a screw that is broke off? the screw is very very tightly in the manifold. I have never drilled and re tapped before so can anyone...
I have a 1999 Jeep Grand Cherokee v8 4.7L 4x4, and I'm trying to find where the AIT Sensor is...but it says its near the Intake Manifold, but I can't find it someone please help me I'm all confused.