My subwoofer is 400 watt rms at 2 or 8 ohm
my amplifier is 400 watt rms at four ohms and 2 x 200 watt rms at 2ohms
If i wire both 200 watt rms channels to my subwoofer will i get 400 watt rms at 2 ohms?
if not can you explain why please?
oops sx-315 and I cant find paper work due to move. Im talking about how do I set it up on the wiring with receiver, dvd vcr combo, and tv. I got the speaker, they are color coded. There is a way to setup so tv comes thru it when dvd player is off. And have sound from player when movie on etc...
I just recently bought this car cheap for the gas mileage. I noticed after driving it a couple times that the dome light stays slightly lit while driving and if I turn the switch to off, it turns off the radio. There is an aftermarket radio in the car currently but I don't think that is the...
of an issue? Here's what the lights look like... [http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/185681_166117603440707_100001274044129_387404_767963_n.jpg] [http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/182866_166118163440651_100001274044129_387405_6462067_n.jpg]...
I need the wiring diagram for a 1994 Jeep Grand Cherokee. I have the steering column out of one and I'm using it in a modified 46 Dodge P/U. All the wiring is on the column, but I need to know where these wires go, so I can wire the P/U to the steering column.
Thanks, Bill
Okay i just wanna know how wrong i am here... if im looking to get 2 12 inch subs that ran at 600 RMS dual voice 2 ohms, i want to get a 2 channel amp that runs at 600 RMS.. so then each channel gets 600RMS and/or a 4 channel amp that runs 300rms each channel then bridge to channels to make...
I just moved into an old apartment. I only have a cable outlet on the wall in the living room. There is a dish already installed on the balcony. It seems that the coaxial cable that runs from the installed dish was hooked to the cable outlet on the living room. However, I guess that when the...
I just moved into an old apartment. I only have a cable outlet on the wall in the living room. There is a dish already installed on the balcony. It seems that the coaxial cable that runs from the installed dish was hooked to the cable outlet on the living room. However, I guess that when the...
hey guys, I'm in a bit of a mess with my megane. I bought it without a stereo in it so i put my own in out of my Ka. the CD player and iPod dock work fine and i know the radio works fine in my Ka but I cannot seem to get the preset stations to remain.
I have been told that the Live connector...
i just wanted to know if i could use 10 awg on a 1.5 farad power cap. As i tried fitting an awg fuse holder and it blew my amp and i ended up rewiring. I just wanted to know whether i could use the wiring i have in their which is 10 awg to wire the power cap as it would save me a lot of time
I am putting an aftermarket radio in my avalanche and its a 2500 if that matters. The aftermarket radio is a alpine. But im having issues knowing the stock wires from the truck and knowing where they plug into on the radio harness. I have looked at diagrams but im still not sure. I do have...
i have 2 12" kicker cvrs with like a 450 watt kicker amp, they are plugged up with a converter to the stock stereo system, i bought the less expensive wiring kit and im afraid they dont sound as good because of me doing so. They hit real hard on long deep bass hits but transition wise they suck...
I have a 1989 suzuki tsx 125 / ts 125 x dunno the difference there. Long story short it has no spark. I am looking at the magneto / generator and need the wiring diagram for it because it has CDI with normal looking coil (no primary coil + lighting coil) and i suspect the coil is not producing...
Jeep CJ7
Orig. AMC 304 V8
Stock Ignition
I wired it as following -
Red - Ignition Power
Black - Ground
Green - Neg. Coil Terminal
At 8cyl. Option
Idles at zero or at least really close.
Hardly moves while flooring it
At 4cyl. Option, flooring it gets to around 800 RPM's...
Obviously its...
I'm trying to wire my amp to my car and the stereo has no remote wire. Should I hook up the amp's remote to another wire in the stereo or install a switch onto the remote?
I want to install a remote starter. I have the wiring diagram, but there is more than one wire of the same color. How do I know which is which? They are also marked with lines (gray in color) and some are close together and others are further apart). It's a 1997 Acura EL.
I want to install a remote starter. I have the wiring diagram, but there is more than one wire of the same color. How do I know which is which? They are also marked with lines (gray in color) and some are close together and others are further apart). It's a 1997 Acura EL.
So i have a amp pusing 1800w max and about 500RMS, my sub is 1200RMS and 2400Watt max,, right now the sub is wired at 4ohm, my amp can handle 1ohm, so i was wondering will i get more power if i wire my sub to 2ohm? thanks for your answers! =D
i bought a 99 mitsubishi eclipse gst yesterday and when i was messing with the aftermarket stereo i noticed the balance and fade were all switched around. and the factory wiring harness is cut out and its just wires so im just looking if anyone knows what colors are to what wires for the stereo
I want to add 2 unlock switches to my Jeep, one Lock/Unlock in the tailgate area and an Unlock only switch hidden outside the truck should I get locked out...
I do produce delivery and I use my truck for it, and being that I have a remote start and keep it running while im delivering, I like...