I have an 2001 Hyundai Accent with a automatic in it which recently blew. The car is still low miles and in good shape so i want to fix it and my plan is to put a 5-speed manual in place of the auto. I have worked in a tranny shop before so replacing a tranny is no problem for me but my only question is about the wiring? Do i have to swap out the computer and tranny harness or is their some way to work with that using the 5-speed? Also are the drive shafts the same and if you can think of any other problems I would run into. I know I have to add a clutch pedal and slave cylinder as well as the shifter and shifter linkage. Thanks for any help you can offer!