Car audio amp, help with woofers?

L

larry_dyer2002

New member
Joined
Dec 6, 2010
Messages
2
Reaction score
0
Points
1
I have a Kenwood 1800 watt 2 chanel amp. model KAC-9014D.

What subwoofers should i get to keep them from blowing up??
 
That amp is around 650w rms at 2 ohms.
It sounds like you're looking for a pair of subs, so anything that's 300-400w rms with either a single 4 ohm or dual 2 ohm voice coil.

these would work: http://www.sonicelectronix.com/item_8572_Kenwood-KFC-W3011.html
as would these: http://www.sonicelectronix.com/item_9348_2-Pack-of-Kicker-CVR122-07CVR122-CVR12-Dual-2-ohm.html
 
This amp is actually a single channel mono amp, it has 2 + and 2 - for ease of installing multiple subs. That being said. Kenwood amps are notorious for being rated for 1ohm, but not holding their own @ 1ohm. SO I would recomend a final impedance of 2ohms.
Here are some speakers that would work well with this amp.

http://www.sonicelectronix.com/item_8362_Kicker-07CVR122-CVR122.html
or
http://www.sonicelectronix.com/item_14786_MTX-Audio-JackHammer-JH5512-04.html

wiring is key, look @ this guide on how to wire the subs so you wont have anymore problems.

http://knowledge.sonicelectronix.com/tools/subwoofer-wiring/

good luck!
 
Back
Top