KevinCaulfield
New member
- Jan 8, 2011
- 1
- 0
- 1
Hi I have a 00 1.2 fiat bravo.
She was driving fine until yesterday when I came out from shopping and it wouldn't start.
1.The battery was disconnected,charged and replaced
2.now she is cranking but not firing..
3.The CODE light stays on when I try start.
4 I have the red key, the blue key is broke(snapped)
5.Up to now I have been using a cut key(not red or blue) and has been working all along.
Now
The red key(master key) will only open doors +trunk/boot
BUT will not turn in ignition.
the cut key is cranking the engine but code light remains on and she doesn't fire.
Car is currently sitting up at the supermarket
Any help?
The key that is cut has been working all along. so this leads me to believe that it is programmed with the 5 digit code. but now im unsure ..
thanks for reading
She was driving fine until yesterday when I came out from shopping and it wouldn't start.
1.The battery was disconnected,charged and replaced
2.now she is cranking but not firing..
3.The CODE light stays on when I try start.
4 I have the red key, the blue key is broke(snapped)
5.Up to now I have been using a cut key(not red or blue) and has been working all along.
Now
The red key(master key) will only open doors +trunk/boot
BUT will not turn in ignition.
the cut key is cranking the engine but code light remains on and she doesn't fire.
Car is currently sitting up at the supermarket
Any help?
The key that is cut has been working all along. so this leads me to believe that it is programmed with the 5 digit code. but now im unsure ..
thanks for reading