Sep 9, 2009 #1 C candis00 New member Joined Sep 9, 2009 Messages 1 Reaction score 0 Points 1 over but running rough.? Backfires through carb. Anyone ever come across this, and how do I solve it, please?????!!!!!
over but running rough.? Backfires through carb. Anyone ever come across this, and how do I solve it, please?????!!!!!
Sep 9, 2009 #2 T Timboishere Member Joined Apr 1, 2009 Messages 130 Reaction score 0 Points 16 Sounds like the timing is not quite right and letting hot gasses back through the inlet. Maybe just one tooth out
Sounds like the timing is not quite right and letting hot gasses back through the inlet. Maybe just one tooth out
Sep 9, 2009 #3 M maclaren New member Joined Sep 5, 2008 Messages 3 Reaction score 0 Points 1 when you reset the ignition timing it is almost certainly 180 degrees adrift and trust me it will be more than one tooth out
when you reset the ignition timing it is almost certainly 180 degrees adrift and trust me it will be more than one tooth out
Sep 12, 2009 #4 S ShaunD New member Joined Jul 17, 2008 Messages 9 Reaction score 0 Points 1 sounds like the timing is out by a few degrease and or an air leak on the inlet manifold recheck your timing and the inlet manifold also make sure all the vacuum pipes are attached in the right places all so the ht leads
sounds like the timing is out by a few degrease and or an air leak on the inlet manifold recheck your timing and the inlet manifold also make sure all the vacuum pipes are attached in the right places all so the ht leads