theborkene
New member
- Apr 27, 2010
- 2
- 0
- 1
hey i've done tons of research.. and non has answered or given my a straight answer. what my problem is. i just replaced and swapped my old b16 intake manifold for another ( jsut wanted a newer one) so after the whole swapp the car starts up fine.. but after around 5 minutes of idle the car's rpm drop from 2,000 to 700 just dropps not slowly and the engine sounds really low.(normal) but after about another 4 minutes you can see white smoke from the breather valve. the harder you throttle the more spews out.
keep in mind after research:
i didn't know i had to bleed the coolant system, ( going to do it tomorrow)
i also swapped a newer valve cover,
i also noticed EMPTY oil(car has been sitting for awhile) so i filled it up, and it's a little over what suppoused to be in the engine.
this is a ls vtec engine, B18 block with b16 head.
pleaseee i begg for help!!!
thank youuu
also this car is NOT BOOSTED, and i did not touch ANY of the other componets of the engine, JSUT THE intake manifold.
keep in mind after research:
i didn't know i had to bleed the coolant system, ( going to do it tomorrow)
i also swapped a newer valve cover,
i also noticed EMPTY oil(car has been sitting for awhile) so i filled it up, and it's a little over what suppoused to be in the engine.
this is a ls vtec engine, B18 block with b16 head.
pleaseee i begg for help!!!
thank youuu
also this car is NOT BOOSTED, and i did not touch ANY of the other componets of the engine, JSUT THE intake manifold.