bobseditsuite
New member
- Jul 14, 2008
- 4
- 0
- 1
My Sanyo TV, model DS20425, suddenly stopped working. When I plug it in, I hear the normal soft "pop" from the speakers, then it immediately seems to shut down. There's also a very slight little pop in the area of the back of the picture tube near the focus rings. There's no indication of the picture tube energizing at all.
After two seconds or so, the cycle starts over. On-off-on-off....
However, a time or two, the cycle was broken and the TV came on for a minute or so before shutting back down and restarting the cycle.
There are no burn marks on the boards. I cannot find any broken solder joints or frayed wires. I re-seated all of the wiring connectors. No leaking caps. No cracked boards. The TV has not been moved, jarred or dropped. The fuse is fine.
Any ideas?
Thanks in advance!
After two seconds or so, the cycle starts over. On-off-on-off....
However, a time or two, the cycle was broken and the TV came on for a minute or so before shutting back down and restarting the cycle.
There are no burn marks on the boards. I cannot find any broken solder joints or frayed wires. I re-seated all of the wiring connectors. No leaking caps. No cracked boards. The TV has not been moved, jarred or dropped. The fuse is fine.
Any ideas?
Thanks in advance!