Can it mean
(a) you have not touched your computer in a while (eg- no mouse movement, typing ect) OR,
(b) you are still using your computer, and have the facebook page open, just havnt used it in a while
(c) you are browsing facebook profiles and active on facebook, but havn't talked to...
This morning my car began to idle very rough while I was at a stop light. The check engine light came on as well as the EPC light. It was difficult to steer. When I pulled over I turned off my car and re started it and the EPC light turned off and the check engine light came on. I have had this...
My son just had the timing on his bug adjusted. We had replaced plugs, points, rotor beforehand. Now it seems to be idling a little low and acts as if its on the verge of dying when he's at idle. I believe there is a idle screw on the carb, but ...which one is it? And is there a process I...
when i start her in the morning its is an easy start and it idles at 800 rpm (have a tach) yet as it gets warmer..the engine... then the idle gets up there too.....1600.....2000...2400. It gets to at its highest 3000 rpms.... idleing. Yet when i put cars in gear, it gets back to normal again...
When i first start my cutlass supreme it idles really high the tach is at 3 i think,but when i drive it for a few miles and shut it off and start it again then its fine for the rest of the day. my other car idles high for a few min. then kicks itself down to normal, but my cutlass doesnt return...
Hi, the engine runs at high rpm's but doesn't idle. we believe we've checked the usual items. Does anyone have thoughts to share and/or we may have missed something. Between my son and I we really know our way around our toolboxes. Thanks, TC
Hi, the engine runs at high rpm's but doesn't idle. we believe we've checked the usual items. Does anyone have thoughts to share and/or we may have missed something. Between my son and I we really know our way around our toolboxes. Thanks, TC
my carburetor is known for problems, im buying a weber in about a month but i want to at least try and get my current carb working decently so i can drive the truck. (1984 nissan 720 4x4 2.4L)
the choke must be set to 3/4 (about a 4mm gap between choke plate and carb wall) to even keep itself...
when i am at a stop or in park, my car idles pretty rough, and about 100rpm below normal. i have changed the plugs an wires, cleaned the IAC valce, cleaned the Throttle body, Cleaned the Throttle positioning sensor, changed most of the vaccume hoses and inspected others,ive done a torque test...
i have a '70 something artic cat el tigre its a 500 cc engine and has the usual 2 pistons but what rpm should it idle at? right now it idles at 2500 rpms and will move at about 5500 to 6000 and i think that if i put a new belt on it that will help it move at more of 4000 but what worries me is...
it was sitting for about five years and i just got it running. it seems slugish when i hold the throttle wide open but once the rpm's come up it is ok. it will not idle unless i adjust the throttle cable so it has a high idle. i have completely cleaned the carb and got new plugs. i drained the...
My 1998 Ford Explorer will not idle. It starts up fine if I put my foot on the gas but as soon as I lift my foot off the peddle it dies. Any suggestions?? Thanks :)
I also did the ignition key engine code test and go no codes.
It will not idle, I start the car giving it alittle gas and as long as i hold the pedal down, it will stay on, but if i let off it shuts off, it will crank back up just wont idle. I have changed the fuel filter, fuel pump, it has a...
Ive tried every thing to make the bike idle it just wont simply idle i even put the idle screw in all the way still no help.
and i even cleaned out my carbie
but when i took my exhaust off the bike does idle but with it on it doesn't idle
so i thought to my self ? that the exhaust is...
i know its not likely it will have a cool sounding idle with a tbi but just wondering, just had my motor in my truck built and it has a comp cams xe249 cam, heres the specs http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=90&sb=2
so do you think it will? will the sound of the idle change...
i know its not likely it will have a cool sounding idle with a tbi but just wondering, just had my motor in my truck built and it has a comp cams xe249 cam, heres the specs http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=90&sb=2
so do you think it will? will the sound of the idle change...