annonymous
Member
- May 24, 2008
- 81
- 0
- 6
me, just like a gazillion other people on here... i have a a/c delco car stereo and speakers. so i went to walmart and bought a dual brand, 200something watt radio. went through wiring 3 times. also had someone else check it over twice. all fuses are good. (side panel by steering wheel and under the hood). i connected the wires to the wire harness that i bought additional (i used crimp connectors). all has a good secure connection. i also have the instructions to radio and haynes manual for the 98 neon. so here is the problem: the ac delco works fine when hooked up, when i hook up the new radio it has power but no sound. ac delco has power and sound.... im stumped. to tie up any open ends. the car has no additional amps or anything like that. i did swap the radio at walmart for a brand new one. hooked it up, still same problem. thanks for any help outside the typical norm of checking fuses and wiring as i said before it has been checked several times by different people. all color codes and crimps/connections are secure. please post if there are additional questions you may have to help me resolve my problem. serious post/replies only as this is getting frustrating. i know car stereos well and very good in general with electronics. i have installed many many car stereos with little or no issues, which i have been able to complete to full working condition, just this scenario has me stump! PLEASE HELP!!!!!