can the upper intake elbow (plenum) from a ford mustang fit a crown vic of

C

cobra

Member
Joined
May 17, 2008
Messages
34
Reaction score
0
Points
6
the same model year and engine size? i have a 2001 crown vic and i put a 75mm throttle body on it but i need the upper intake plenum as well to match the increased size of the throttle- trickflow makes this ported plenum but they sell it as a plenum for the ford mustang 4.6l 2v. the mustangs air intake is toward the passenger side of the engine bay and my vic's is toward the drivers side.
 
First, check out this:

http://www.granatellimotorsports.com/outlet/index.php?main_page=product_info&products_id=18

Yes, both the one above and the trickflow will fit, however, to make the installation easier, you will need a 1/2 inch plenum spacer, and because a Crown Vic uses 4 vacuum ports and a Mustang only has 3, you will need a vacuum T fitting.

For more information, check out this thread on Crownvic.net, you might also want to consider joining.

http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=1606447&fpart=1
 
Back
Top