My amplifier (Sound Magus H500, which is also re-branded in Australia as Option Audio OAH500), came with a manual that says different specs from the official site and other internet sources. It's basically a 5-channel amp (A/B class and D class in one).
If you can see below, I am more concerned about the Bridged capabilities of my amp at 4ohm.
INTERNET SPECS
RMS Power at 14.4V (into 2 ohm THD+N < 1%)
130W X 4 + 500W
RMS Power at 14.4V (into 4 ohm THD+N < 1%)
90W X 4 + 300W
4 Ohm Bridged RMS Power at 14.4V (into 4 ohm THD+N < 1%) 260 X *2 + 500W
MANUAL SPECS
RMS Power at 14.4V (into 2 ohm THD+N < 1%)
120W X 4 + 500W
RMS Power at 14.4V (into 4 ohm THD+N < 1%)
90W X 4 + 300W
4 Ohm Bridged RMS Power at 14.4V (into 4 ohm THD+N < 1%) 200 X *2 + 300W
Which is the more logical specification of my amp when bridged?
If you can see below, I am more concerned about the Bridged capabilities of my amp at 4ohm.
INTERNET SPECS
RMS Power at 14.4V (into 2 ohm THD+N < 1%)
130W X 4 + 500W
RMS Power at 14.4V (into 4 ohm THD+N < 1%)
90W X 4 + 300W
4 Ohm Bridged RMS Power at 14.4V (into 4 ohm THD+N < 1%) 260 X *2 + 500W
MANUAL SPECS
RMS Power at 14.4V (into 2 ohm THD+N < 1%)
120W X 4 + 500W
RMS Power at 14.4V (into 4 ohm THD+N < 1%)
90W X 4 + 300W
4 Ohm Bridged RMS Power at 14.4V (into 4 ohm THD+N < 1%) 200 X *2 + 300W
Which is the more logical specification of my amp when bridged?