Hooking up A BLUE RAY PLAYER TO PROJECTOR?

J

joannapach@sbcglobalenet

New member
Joined
Aug 27, 2009
Messages
1
Reaction score
0
Points
1
How to do that? Are there special cables etc?

2nd question:
How to hook up assisted listening device to a theatre system, so that way the person could hear the person speaking into the microphone or to listening to the movie???? Thanks.
 
What kind of projector?
Most Blu-Ray players have HDMI and component (YCbCr) outputs. Most new projectors have HDMI and/or DVI input. If it's HDMI, just hook that up. If it's DVI, then just get a HDMI-to-DVI cable or adapter.
If it's an older projector, it might have neither HDMI nor component input. In that case it will probably have RGBHV input, which is what VGA (analog computer video signal) uses. So get a HDMI-to-VGA adapter and then a VGA-to-5BNC adapter to plug in to the 5 BNC plugs for RGBHV.
As for the other thing I'm not exactly sure what you're saying, but you'll need some kind of audio receiver or stereo system for that I believe.
 
Back
Top