Malicious_Saint78
New member
- Sep 21, 2010
- 2
- 0
- 1
Power Acoustk touchscreen dvd, PTID-7002NR. Infinity 10" BassLink powered sub, Also 5.5" mirror monitor with backup camera. Monitor and cam are runni8ng from the fuse box with a "add-a-circuit" thing, Dvd player in connected with installation kit, plug connectors. Thought it was a groung issue, so I ran a separate ground tied into facory ground. Also sometimes when I start the engine, the mirror monitor has a white haze, like fog, until I kill the engine and restart. The vehicle is a 99' Durango. Should I run a new "batt." and a new "acc" from fuse box. Or maybe a capacitor? the BassLink is 200 watts RMS. My battery gauge on the dash, claims decent voltage, no movement from the needle, normally sits around 14. The monitor and cam are both 12 volt applications. When the dvd volume reaches 30 +/-, the unit will reset, come back on with no volume untill I power it off, and /or restart the engine. My front speakers are Polk Audio DB 6.5 components, the rear are same model in coaxal (two-way). both are wired straight to unit with no amp between. also, when dvd resets, amp pops. I'm assuming thats normal with remote wire operation. The vehicle's battery and altenator are both stock. Any insight would be so much appreciated. Thank you.