Nitro RC Car Not Starting Up? Help? (Pictures)?

[Deniz1]

3 years ago, my cousin gave me his Nitro RC Car, and since then it has been sitting in my basement, so 1 day, I decided to check it out, and I was wondering how to start it and all. I soon got all the essentials to work, such as power, remote, and gas/reverse, and left/right. But, I soon realized I didn't have a charged glow igniter, so I ordered I nice little kit online for aorund $20 including a new starter and new charger. So, when it got here, I charged it for around 4 hours thinking that should be enough(didnt come with instructions) and it wouldn't start up... So then I tried starting up the engine, i put the igniter in the hole and then pulled the string thing a couple times, (as I saw on youtube videos) but it wouldn't work... I have some pictures, PLEASE HELP!!!
Also, can you give me some tips on how to start the thing and how it works and stuff THANKS!!
http://i1263.photobucket.com/albums/ii636/TheDeboy/4b1a1113.jpg
http://i1263.photobucket.com/albums/ii636/TheDeboy/c8dc2bf8.jpg
http://i1263.photobucket.com/albums/ii636/TheDeboy/722e3b5a.jpg
http://i1263.photobucket.com/albums/ii636/TheDeboy/b6464821.jpg
http://i1263.photobucket.com/albums/ii636/TheDeboy/cf57900c.jpg
http://i1263.photobucket.com/albums/ii636/TheDeboy/e9ca8da1.jpg
http://i1263.photobucket.com/albums/ii636/TheDeboy/1215a51f.jpg

 

[HoldenMcGroin]

Replace the glow plug. Put new fuel in the tank, make sure there are no air leaks in the fuel tubing, readjust the high and low needle valves. It should start. You'll have to readjust the needles once its running. If this does not work you may need to check the compression to make sure there is some.