The cabinet is the standard two input (16ohm and 4ohm in mono and 8ohm for each side in stereo) cabinet. I hook up two amps in 8ohm and play both through the cab, or switch back and forth by way of a Morley A/B switch. I've always used it this way when using stereo with two amps running. Can I use one side independantly? One 8ohm amp to one 8ohm input, thus in theory using only one side of the cabinet. Or, do I have to always have two amps plugged in to use it properly, without causing any potential damage.
Open to all answers, but hope Saul or Left T see this question as they usually give some spot-on answers
I know how to run it in mono. If I wanted to use all 4 speakers, I would change the ohm of the amp to 4 or 16 and use that mono input. I want to know if I can use the "stereo" feature using one 8ohm side with only 2 speakers whithout another amp running on the other side without damaging the cab.
Open to all answers, but hope Saul or Left T see this question as they usually give some spot-on answers
I know how to run it in mono. If I wanted to use all 4 speakers, I would change the ohm of the amp to 4 or 16 and use that mono input. I want to know if I can use the "stereo" feature using one 8ohm side with only 2 speakers whithout another amp running on the other side without damaging the cab.