replacing my car stereo, need help?

J

JohnN

Member
Joined
Jun 4, 2008
Messages
106
Reaction score
0
Points
16
ok, so i have done this before - but i just need a little advice. The wires that are coming from my dash are labeled:

bat
acc
ill
park
rf-
lf-
mute

rr-
lr-
rf+
lf+
rr+
lr+

and the wires coming from the stereo i wish to install are labeled:
Ignition
Battery
Chassis Ground
Remote Turn on
rf+rf-
lf+lf-
rr+rr-
lr+lr-

so, my question is...what do i connect to what. . . i know which ones are the speakers, and to connect batt to batt, I'm mainly concerned about "acc" "ill" and "park" coming from the car, what do i do with those. AND with "Chassis Ground" & "Remote Turn-On" coming from the stereo, where do i attach those? do i need to attach everything?....


thanks in advance
 
Visit http://installdr.com/ and see if the site can be of any help. I've used it several times and have found my answers there.
 
acc to ignition
ill, remote turn-on, park don't worry about it.
the ground (black wire) goes to the chassis of the car

let me guess by looking at the harness you have on the first one it's a metra 70-1817 harness right it's a gray and black (Chrysler/Plymouth/Jeep/Dodge 1985-Up)
 
Back
Top