I know Shell is one of the cleanest but I have no Shell stations in my area. The two big ones are BP and Marathon, I don't know which one would be best to use. Or what others are pretty clean.
my brother owns a mazda 626, 97 stick shift and the engine had broke down so we got it fixed and he realised that everytime he goes over 4500rpm it feels like it's losing power, what could cause that?
well i have a 1995 mazda 626 and i had just changed the spark plug wires because it wont climb hills that great it goes slow up hills.. It hasnt had an oil change in awhile could that be the problem? What coudl the problem be?
it hasnt had a tune up in awhile either
When vehicle is in any gear and idling, e.g. at a stoplight, rpm drops to about 400-450 (according to stock tach) and strong vibration results. Idle screw will lower idle but can't raise it. Vacuum is normal. Cap, rotor, plugs are new. Spark plug cables resistance within spec. Took apart and...
I have a 2000 Mazda 626, which has a safety feature which wont let my car start if i havent clicked the unlock button before hand. Well, i've solved that issue.. but now its acting the same way...but isn't being fixed by the normal unlocking on my clicker. This time it did turn on, but only...
I have a mazda 626 98 and it has been a good car until last year it started giving me trouble so i had to replace the transmission, which was a pain. Then for awhile it was fine, but then a few months later it started ticking (i guess you can call it that), and when you open up the hood the...
I pulled out of my driveway one day and when I started going my car just stopped. The transmission fluid was either very low or empty. We filled it up but the car still will not move in either gear. Any idea what I can check and how to check it? It is a 4cyl.
ineed help i have a 95 mazda 626 i change everything i can think off still wont start engine rotates i flood my spark plugs but my car would not start some one please help!
It 's a LX 2.0 engine. When it is cold works fine and shifts normally. When the engine warms up it shifts 1st to 2nd gear normally, but hesitates 2nd to 3rd and 3rd to 4rd. After shifting the engine rpm drops from 2500 to 700-900. The car loses lots power after shifting. This happens only when I...
...fine and my water pump is fine ,? My bottom hose is really cold even though the top hose is really hot . . and help would be really cool.
I already changed temp sending unit.. i wish it was that easy .
I squeezed the bottom hose with the cape off and fluid came out
works fine and my water pump is fine ,? My bottom hose is really cold even though the top hose is really hot . . and help would be really cool.
i check thermostat its in right. i changed it cause it was reading hot . but still nothing changed
Plus i cahanged temp sending unit
Well the top hose...
I wish to give my car a bit more power by putting a new engine in it, However i do not know what engines will fit, but they have to be front wheel drive. the engine i currently have is the default 4 Cylinder 2.2 Litre F2. i have only found one other engine other than the F2-T and i want a more...
It 's a LX 2.0 engine. When it is cold works fine and shifts normally. When the engine warms up it shifts 1st to 2nd gear normally, but hesitates 2nd to 3rd and 3rd to 4rd. After shifting the engine rpm drops from 2500 to 700-900. The car loses lots power after shifting.
I've checked engine oil...
It 's a LX 2.0 engine. When it is cold works fine and shifts normally. When the engine warms up it shifts 1st to 2nd gear normally, but hesitates 2nd to 3rd and 3rd to 4rd. After shifting the engine rpm drops from 2500 to 700-900. The car loses lots power after shifting.
I've checked engine oil...
I wish to give my car a bit more power by putting a new engine in it, However i do not know what engines will fit, but they have to be front wheel drive. the engine i currently have is the default 4 Cylinder 2.2 Litre F2. i have only found one other engine other than the F2-T and i want a more...
Last weak it wouldnt start at all. I changed the battery, cap and rotor, and plugs it runs now but after it sits a while it just barly starts. when it start there is a puff of black smoke then it runs. can any one help me?
Last weak it wouldnt start at all. I changed the battery, cap and rotor, and plugs it runs now but after it sits a while it just barly starts. when it start there is a puff of black smoke then it runs. can any one help me?