i want to buy some new wheels for my 2000 gmc sierra, im looking for ones the exact same size as the stock ones but i dont know the complete specs on them. best answer goes to most detailed answer
I have a 2003 gmc Sierra and I would like to buy a new brush guard, the one I really like is a go rhino 3000-series, on the web site for go rhino says it will fit a 03 chevy Silverado 1500 but says nothing about a gmc. Does anyone know if it will fit?
The starter mounting bolts were bad and the starter broke loose when i tried starting it. After fixing the threads and replacing the starter, when i go to start it, it will not start and smoke comes out of the air intake. The engine turns so i know the starter is good and working and it turns in...
The starter mounting bolts were bad and the starter broke loose when i tried starting it. After fixing the threads and replacing the starter, when i go to start it, it will not start and smoke comes out of the air intake. The engine turns so i know the starter is good and working and it turns in...
underside of my hood what are they for? I don't have power locks, windows or seats.
It's an automatic.
Would they have anything to do with my batterie?
I'm sorry I should have been more clear. My truck did not come with power locks, windows, or seats.
underside of my hood what are they for? I don't have power locks, windows or seats.
It's an automatic.
Would they have anything to do with my batterie?
I'm sorry I should have been more clear. My truck did not come with power locks, windows, or seats.
On the hvac control panel, one of the lightbulbs is out (off). Also, the front passenger side speaker is out too.. I banged under the dash with my hand and made both come back on. Also, my a/c fan knob doesn't function at level 5 max, but this is probably a separate issue.. What do I need to fix?
I have a 2004 gmc sierra 2wd, i would like step by step instructions(if possible with photos) on how to replace the upper and lower ball joints. Thanks
Ok I have a 2002 GMC Sierra 2500HD Crew cab 4x4 with a 6liter V8 and a 4.10 rear end and 175,000 miles on it. Ok so Ive never had any major problems but This is annoying, When braking Sometimes (not always) it starts kinda bouncing (not the kind from bad shocks) really bad sometimes worse than...
I barely bought a truck yesterday and it turned on and everything was fine with it. As i was driving for about 35 minutes the tuck completely shut off, and didnt wanted to turn on. i put gas on it and it didnt work, so i check the battery, but that wasn't it. i towed it to my house, and it still...
Im trying to get my fuel milage up. Im getting roughly 14.5 to 16.5 When I first got the truck it got like 20... I have a k n n air cleaner...I use Ams oil full sythetic with filter....I tried cleaning mass air flow sensor. ran lucas fuel injector clean threw several times. anyone get an idea...
I have a 1993 GMC Sierra K1500 with a 5.7L V8 and when im driving it and let of the gas around town it chugs and sounds like its gonna die. Could it be the screen on my fuel pump is plugged? I replaced the fuel filter about 1000 miles ago and it didnt help and i replaced the plugs, wires, cap...
Will I experience any increase in power? Better gas mileage? and what one out there is the best to buy? Also does anybody know anything about cold air intakes? will I gain any power there? and what one is the best to buy?
Stays too long in 1st gear. when i come to a stop shell jolt real badly, it feel like someone bumped into me from behind. The truck wont go faster than 50 mph. Shes been over heating really bad too. Now ive changed the trany filter already so.....? there were metal shavings in the pan. But this...
...wheel base 4WD? 1981 GMC Sierra 1500
350 2WD
what is the best way to go about such a conversion?
what does a project such as this generaly cost?
am i better off purchasing a new truck, and droping my engine in the new body?
and which process should be carried out first, if it is not best to...