Programming codes for a samsung rant on the sprint network?

K

KellyR1

New member
Joined
Jan 10, 2009
Messages
7
Reaction score
0
Points
1
I need programming codes to deactivate a samsung rant from one sprint account and to activate the phone on my personal sprint account... any programming codes or hard to get info on this phone or for this network is great...
 
Programming codes to activate the phones

Program your Samsung Rant

Last Updated: Nov 08, 2012

You can use these programming instructions if you have a new phone or a used phone activated by a previous owner, and you have completed the Activate your new phone process in My Sprint. If so, you should refer to the page you printed showing the codes you need for these instructions to work.

To program your Samsung Rant™ phone, perform the following steps:

NOTE: If you have already entered the MEID in the Activate your new phonepage online, skip to Step 2.

Find the Mobile Equipment Identification Number (MEID) on your phone. You can find it in two places:
Underneath the battery in the phone on the right side of the barcode sticker: Turn off the phone and remove the battery to view. After viewing, place the battery back into the phone.
The Barcode sticker on the end of the original box: Labeled DEC-HEX.
Press and hold the Power/End button to turn the phone on. The date and time screen appears. The device will power on and perform a hands-free activation. This may take a few minutes.
When you receive the activation completed message on your phone, press OK to reset. The phone is now ready for voice and data use.

NOTE: If you received the message, your activation could not be completed. Please try again later, or do the following:

Press the Menu/OK button to access the main menu, and then select Settings.
Select More > Data > Update Data Profile. You will see the message The Network is preparing your services, please wait.
Turn the phone off and back on again. To confirm the activation, make a phone call.
If the phone is still not working, continue with the Manual Programming Instructions.

Manual Programming Instructions, if hands-free activation did not work

To program your phone manually, perform the following steps:

If you have a new phone that has never been activated:
Press ##, enter the one time 6-digit code from the Programming Informationsection on the Activate your new phone page, and then press # again. (The last # will not show on the screen. Example: ##123456#)
If you have a used phone that has previously been activated:
Press ##, enter the secondary 6-digit code from the Programming Information section on the Activate your new phone page, and then press #again. (The last # will not show on the screen. Example: ##123456#)
In the MDN Service Program screen, select Edit.
Enter your 10-digit phone number from the Programming Information section on the Activate your new phone page. Select OK.
Enter the 10-digit MSID number from the Programming Information section on the Activate your new phone page. Select OK.
Select Done. The phone will automatically turn off and then turn back on again. To confirm the activation, make a phone call.
Once the activation is completed, press the Menu/OK button to access the main menu, and then select Web to complete the activation of the Web service.

Share on linkedinShare on facebook
 
Codes

KellyR said:
I need programming codes to deactivate a samsung rant from one sprint account and to activate the phone on my personal sprint account... any programming codes or hard to get info on this phone or for this network is great...
Click to expand...

Hey buddy here is what you are looking for Program your Samsung Rant

Last Updated: Nov 08, 2012

You can use these programming instructions if you have a new phone or a used phone activated by a previous owner, and you have completed the Activate your new phone process in My Sprint. If so, you should refer to the page you printed showing the codes you need for these instructions to work.

To program your Samsung Rant™ phone, perform the following steps:

NOTE: If you have already entered the MEID in the Activate your new phonepage online, skip to Step 2.

Find the Mobile Equipment Identification Number (MEID) on your phone. You can find it in two places:
Underneath the battery in the phone on the right side of the barcode sticker: Turn off the phone and remove the battery to view. After viewing, place the battery back into the phone.
The Barcode sticker on the end of the original box: Labeled DEC-HEX.
Press and hold the Power/End button to turn the phone on. The date and time screen appears. The device will power on and perform a hands-free activation. This may take a few minutes.
When you receive the activation completed message on your phone, press OK to reset. The phone is now ready for voice and data use.

NOTE: If you received the message, your activation could not be completed. Please try again later, or do the following:

Press the Menu/OK button to access the main menu, and then select Settings.
Select More > Data > Update Data Profile. You will see the message The Network is preparing your services, please wait.
Turn the phone off and back on again. To confirm the activation, make a phone call.
If the phone is still not working, continue with the Manual Programming Instructions.

Manual Programming Instructions, if hands-free activation did not work

To program your phone manually, perform the following steps:

If you have a new phone that has never been activated:
Press ##, enter the one time 6-digit code from the Programming Informationsection on the Activate your new phone page, and then press # again. (The last # will not show on the screen. Example: ##123456#)
If you have a used phone that has previously been activated:
Press ##, enter the secondary 6-digit code from the Programming Information section on the Activate your new phone page, and then press #again. (The last # will not show on the screen. Example: ##123456#)
In the MDN Service Program screen, select Edit.
Enter your 10-digit phone number from the Programming Information section on the Activate your new phone page. Select OK.
Enter the 10-digit MSID number from the Programming Information section on the Activate your new phone page. Select OK.
Select Done. The phone will automatically turn off and then turn back on again. To confirm the activation, make a phone call.
Once the activation is completed, press the Menu/OK button to access the main menu, and then select Web to complete the activation of the Web service.

Share on linkedinShare on facebook
 
Back
Top